The principle of pumps to enhance members

Many men are dissatisfied with their sexual organ parameters and do not want to be patient with them.Therefore, different methods are used to help make the penis thicker and longer.Devices as pumps to enhance members are also widely used.

The principle of operation of the device

Pomp is a cylinder device.This device is designed to increase the penis of a man long and wide, as well as enhance his stand.

The pump acts on a simple principle.When used around the male penis, pressure occurs, which helps improve blood flow, filling the cave with blood.The same thing happens like an erection.The penis becomes very hard, swollen, allowing you to improve its parameters.

Various pumps and pumps

Pumps to enhance the penis, regardless of the type, have a single structure of the structure.It is a transparent flask that describes centimeters.There are also devices where the vacuum is created and the required pressure is maintained.

There are three types of pumps:

Principles of pump operation to enhance penis
  1. Manual.Vacuum is made using piston or pear.Such devices have lower costs, so they are often used.However, men have to wait long for their use for their use.
  2. Automatic.In this type of pump, the pressure in the flask is created thanks to the electric pump, which is already built into the device.For his work, it is necessary to enter the battery.Automatic devices are preferred, as they have high efficiency, allowing you to control pressure and absorption.
  3. Water.The latest type of pump.It is different in water it is used instead of air.Various types of improvement, effective, have several contraindications and work longer than previous models.

Pomping is carried out in two ways.The first is called packing.The point is to stretch the tunic and increase the long penis, but not wide.To do this, use a narrow bottle where the penis cannot swell to the side, but will stretch.

The second method is the classic pumping.In this case, a large flask is used, where the penis has the opportunity to swell in all directions.This allows you to increase the width and length of the organ.

During training, safety precautions must be observed.

Choice criteria

The lover pump is selected taking into account the size of the penis and the purpose of its use.Experts advise the following:

  1. The length of the device should be over 3 cm.
  2. The width should be more than the penis diameter per 2 cm.
  3. For beginners, it is recommended to choose the type of manual device, as it is the easiest.

The dimensions above the members are only taken into account.

In the process of buying, it should pay attention to increased materials.The flask should be strong enough to prevent random damage to the male organs.

Contraindications

It is not allowed to use a vacuum increase in men with the following pathology:

  1. Thrombosis.
  2. Fibrosis.
  3. Hepatic disease.
  4. Kidney disease.
  5. Diabetes.
  6. Heart pathology and blood vessels.
  7. Sexually transmitted diseases.
  8. Starting in university work.

If a man is unsure that he can use a pump to increase the length and width of the penis, then he should visit a doctor for the exam.

The advantages and disadvantages of

Vacuum pumps allow men not only to make their dignity longer and wider.This device also helps improve erection function, extending sexual relationships by reducing organ sensitivity.In addition, this device allows you to adjust the shape of the penis, even in front of the curvature.

The negative side of the pump is only indicated by its improper use.Failure to obey the instructions involves many unpleasant consequences.

Consumption

Impact of pump use to improve members

If you use the pump continuously, then after 6 months the penis will change its size for a long time.To achieve maximum effect, it is recommended to take medication simultaneously that increases sex hormone production in men.But this can be done solely after consulting a doctor.

It should be noted that pumps and pumps to improve penis are one and the same.

They, then tried the pump, note that they could achieve the desired results.Six months later, penis length increased by 3 cm, and thickness - by 2 cm.

Instructions for use

To use a vacuum pump to enhance the penis, there is no special skill requirement.Prior to the procedure, the device should be treated with lubrication to ensure sliding.

A male expert is required to lubricate with special creams, the effect allows us to normalize blood flow, increase blood to the penis.

Then place the genitals in the cylinder.Eliminate air from flakes to create a vacuum environment.Once redness occurs, wait 30 seconds and start the air.This procedure should last no more than 15-20 minutes.

Possible consequences

No wonder special instructions have been made for pump use.The implementation of all manipulation strictly avoids the consequences.But sometimes men ignore the rules.

As a result, instead of the desired centimeters, they accept the following:

  1. The appearance of swollen rings at the base of the penis.This is due to the stagnation of lymph fluid.This phenomenon can occur even with the proper use of a vacuum device.If these side effects are observed, you should stop using the device.
  2. Penis swelling is caused by the entry of large amounts of lymph.
  3. Deginement of erection function.
  4. Penis redness, appearance of bleeding.
  5. Thrombosis.The disease pose a huge threat to human life, but when using a pump is extremely rare.

So there are no negative consequences, it is important not only using the pump properly.It is also necessary not to ignore the presence of contraindications for its application.If they are, then you need to find another method for improving the penis.

Homemade device

For men who don't want to spend money to buy a factory improvement, it is possible to make it at home with their own hands.

From the cuff pump

To create an air -free environment, it is necessary to promote the cuff pump, turning the cuff on the back.Then you need to install the device again, but already in reverse order.

Next, you need to create a valve designed to get out of excess air.For this purpose, you can apply the valve from the aquarium compressor.It should be connected to the appropriate hose and sealing.

From the compressor

How to make a pump to improve members with your own hands

You can take compressor from unnecessary cooling equipment.After extracting the evaporator and capacitor, the pipe it connects should be cut.Then connect the compressor to the network.

Wherever the store for drivers, take air filters.It should be attached to the compressor hole.The filter must be connected to the required size rubber hose.Next, it remains just to try the effect of the device.

These pumps help, but the use of drugs containing testosterone, or the use of Extender with the use of pumps, has a greater effect with the use of pumps.

Using the syringe

Take a plastic tube, cut three parts, size -each should be 10 cm.Attach it to the tee.The result is a three -bastard tee.

To the central withdrawal to attach the nose of the syringe.At the side bend made, install the valve.

It is important that someone opens, and the second - in it.In order not to be confused in the future, you need to draw an arrow that will show the air direction.

Using plastic bottles

Pumps that are relatively easy to improve penis can be made from regular plastic bottles.It's just important to choose different container size.The larger one should cut the top to create a cylinder shape.

At the bottom of the second bottle, make a hole and put it in the first container.It is important that a large gap is not formed between the walls.Then you need to attach the hose to a large container.You can take it from the pump to pump the wheel on the bike.

Care for the device

To maximize the extension of service life, it is necessary to maintain properly.If the device is only purchased and unused, then it should be rinsed with soap, and then dry and treated with any antiseptic.Next, wash the device after each use.

You cannot treat pumps with hydrogen peroxide or boiling water, as well as use grease with fat during the lubricant procedure.Otherwise, the risk of damage is high.